Dodge's Rampage concept seems to have everything that the typical Dodge truck buyer is looking for: massive size, a stylish yet aggressive look and a 5.7 liter HEMI engine. But Dodge says that it designed the Rampage to appeal to those "non-traditional" pick-up buyers.
Huh? This looks like a traditional (albeit very stylized) pick-up. What's so different about it? We'll tell ya...
Traditional truck guys are going to be shocked by this, but this Rampage is basically a truck-shaped car. Not only does the Rampage utilize unibody construction and have an independent rear suspension, it is - gasp - front wheel drive!!
Yes, this brawny and rugged Dodge is a front wheel drive car... er... truck. After reading the concept behind this concept, this drivetrain layout makes sense. You see, Dodge wanted to build a vehicle that possessed the utility of a truck but had the cabin comfort and room of a passenger car. Yeah, we know... that idea basically describes a minivan, but minivans aren't cool -- trucks are, and so Dodge went with the truck theme.
Actually... now that we think about it, this Rampage is a close cousin of the minivan. Take a look at how the doors of this thing open!
In case you couldn't tell from the picture above, the rear door slides backwards -- much like the back door of a minivan. Still, the interior of this Rampage is much cooler than that of most kid haulers. The interior of the Rampage is designed to be "rugged and athletic" (Dodge's words), so it uses a special urethane material for the seating surfaces and has a rubberized floor. Styling touches come courtesy of a raised center console/gauge cluster and exposed metal pieces.
Here's another nod to Dodge's minivan heritage: you know how Dodge touts its trademarked Stow 'n Go seating in its minivan commercials? Well, this Stow 'n Go system finds a home in the Rampage. Not only do the rear seats fold down into the floor, the front passenger seat does as well. You can fit a whole lotta crap in this thing!
Versatility is the key feature of the Rampage, as not only do all passenger seats fold flat to the floor, the "wall" that separates the cabin from the truck bed also folds flat, increasing useable cargo area even more. Not only that, but the rear lift gate can extend and fold down to a 117 degree angle, which transforms the rear gate into a ramp. It's as if this truck/minivan was designed to haul motorcycles or something...
As cool as this concept is, it's only a concept for now. Will Dodge ever build something like this? We doubt it. We don't think people would shell out serious cash for a front wheel drive HEMI-powered truck/minivan/crossover. If Dodge does decide to make one of these, however, we're first in line for the first test drive.
Dodge's Rampage concept seems to have everything that the typical Dodge truck buyer is looking for: massive size, a stylish yet aggressive look and a 5.7 liter HEMI engine. But Dodge says that it designed the Rampage to appeal to those "non-traditional" pick-up buyers.
Huh? This looks like a traditional (albeit very stylized) pick-up. What's so different about it? We'll tell ya...
Traditional truck guys are going to be shocked by this, but this Rampage is basically a truck-shaped car. Not only does the Rampage utilize unibody construction and have an independent rear suspension, it is - gasp - front wheel drive!!
Yes, this brawny and rugged Dodge is a front wheel drive car... er... truck. After reading the concept behind this concept, this drivetrain layout makes sense. You see, Dodge wanted to build a vehicle that possessed the utility of a truck but had the cabin comfort and room of a passenger car. Yeah, we know... that idea basically describes a minivan, but minivans aren't cool -- trucks are, and so Dodge went with the truck theme.
Actually... now that we think about it, this Rampage is a close cousin of the minivan. Take a look at how the doors of this thing open!
In case you couldn't tell from the picture above, the rear door slides backwards -- much like the back door of a minivan. Still, the interior of this Rampage is much cooler than that of most kid haulers. The interior of the Rampage is designed to be "rugged and athletic" (Dodge's words), so it uses a special urethane material for the seating surfaces and has a rubberized floor. Styling touches come courtesy of a raised center console/gauge cluster and exposed metal pieces.
Here's another nod to Dodge's minivan heritage: you know how Dodge touts its trademarked Stow 'n Go seating in its minivan commercials? Well, this Stow 'n Go system finds a home in the Rampage. Not only do the rear seats fold down into the floor, the front passenger seat does as well. You can fit a whole lotta crap in this thing!
Versatility is the key feature of the Rampage, as not only do all passenger seats fold flat to the floor, the "wall" that separates the cabin from the truck bed also folds flat, increasing useable cargo area even more. Not only that, but the rear lift gate can extend and fold down to a 117 degree angle, which transforms the rear gate into a ramp. It's as if this truck/minivan was designed to haul motorcycles or something...
As cool as this concept is, it's only a concept for now. Will Dodge ever build something like this? We doubt it. We don't think people would shell out serious cash for a front wheel drive HEMI-powered truck/minivan/crossover. If Dodge does decide to make one of these, however, we're first in line for the first test drive.
The company is headquartered in Ingolstadt, Germany and has been a wholly-owned (99.55%) subsidiary of the Volkswagen Group (Volkswagen AG) since 1964. Volkswagen Group relaunched the Audi brand with the 1965 introduction of the Audi 60 range. Shortly thereafter the name was acquired as part of Volkswagen's purchase of the Auto Union assets from former owner, Daimler-Benz.
The company name is based on the surname of the founder August Horch, the name itself an English cognate with the English word "hark", meaning listen — which when translated into Latin, becomes Audi.
The company is headquartered in Ingolstadt, Germany and has been a wholly-owned (99.55%) subsidiary of the Volkswagen Group (Volkswagen AG) since 1964. Volkswagen Group relaunched the Audi brand with the 1965 introduction of the Audi 60 range. Shortly thereafter the name was acquired as part of Volkswagen's purchase of the Auto Union assets from former owner, Daimler-Benz.
The company name is based on the surname of the founder August Horch, the name itself an English cognate with the English word "hark", meaning listen — which when translated into Latin, becomes Audi.
The ESF is based on the S 400 Hybrid. One of the ideas installed in the car is something called a Braking Bag. It is an air bag that sits within the ESF's floor and deploys when the car "decides" that a crash is imminent. By increasing friction with the road surface it helps to slow the vehicle down and also stabilises it.
Press Release
Perspectives: inflatable metal structures and braking airbags in the vehicle floor
2009 is a year in which Mercedes-Benz celebrates several anniversaries in the safety field: in August 1939 the safety pioneer Béla Barényi started his work in Sindelfingen. He invented for example the principle of the crumple zone, a trailblazing innovation which entered series production at Mercedes-Benz in 1959. With the help of its in-house accident research function, which was founded in 1969, Mercedes engineers in the following years have developed several groundbreaking innovations in passenger car safety. Now it is time for a look behind the scenes, and in this anniversary year, Mercedes-Benz is using the ESF 2009 research vehicle to reveal what its safety specialists are currently working on - with a time horizon that often extends well into the future.
The ESF 2009 is the first Experimental Safety Vehicle to be built by Mercedes-Benz since 1974. Like its historic predecessors, it illustrates trailblazing innovations in the field of safety and makes the progress achieved clearly visible. These amazing but by no means crazy ideas include inflatable metallic sections which give more stability to structural components within fractions of a second, as well as the so-called "Braking Bag". This airbag housed within the vehicle floor is deployed when a crash is deemed to be unavoidable, and uses a friction coating to support the vehicle against the road surface. The ESF 2009 will be premiered on 15 June 2009, at the Enhanced Safety of Vehicles (ESV) Conference in Stuttgart.
"Safety is a central element of the Mercedes-Benz brand. In this respect we have been setting the pace in the market for almost 70 years. For the benefit of our customers and for road users in general. The ESF 2009 shows that we still have plenty of ideas and the absolute will, to lead the automobile industry in this field even in future", says Dr. Dieter Zetsche, Chairman of Daimler AG and CEO of Mercedes-Benz Cars.
The ESF 2009 was developed and built completely in the test vehicle workshops in Sindelfingen. This safety research vehicle based on the Mercedes S 400 HYBRID features more than a dozen safety innovations, most of which are fully functioning in demonstration mode. "With the ESF 2009, we have chosen this particular time to clearly demonstrate the innovative strength of Daimler. Anybody examining the ESF 2009 in detail will recognise that more safety and improved energy efficiency are not necessarily a contradiction in terms. We want to make progress in both fields with new, trailblazing ideas ", says Dr. Thomas Weber, the member of the Daimler Executive Board responsible for corporate research and development at Mercedes-Benz Cars.
The following five innovations on the basis of the S 400 Hybrid are among the highlights of the ESF 2009:
* PRE-SAFE Structure:The inflatable metal structures save weight or increase the stability of structural components. When at rest, the metal section is in a folded state to save space. If its protective effect is required, a gas generator builds up an internal pressure of 10 to 20 bar within fractions of a second, causing the section to unfold for significantly more stability.
* Braking Bag:This auxiliary brake accommodated in the vehicle floor is a new type of PRE-SAFE® component. If the sensor system concludes that an impact is unavoidable, the Braking Bag is deployed shortly before the crash and stabilises the car on the road surface by means of a friction coating. The vehicle's vertical acceleration increases the friction, and helps to decelerate the vehicle before the impact occurs.
* Interactive Vehicle Communication: The ESF 2009 is able to communicate directly with other vehicles, or via relay stations. Using "ad hoc" networks and WLAN radio technology, it is e.g. able to receive and transmit warnings of bad weather or obstacles in the road.
* PRE-SAFE Pulse: This further development of PRE-SAFE® is able to reduce the forces acting on the torsos of the occupants during a lateral collision by around one third. It does this by moving them towards the centre of the vehicle by up to 50 millimetres as a precautionary measure. As an active restraint system, it uses the air chambers in the side bolsters of the seat backrests.
* Spotlight lighting function: This partial LED main beam specifically illuminates potential hazards. If the infrared camera of Night View Assist PLUSe.g. detects deer at the roadside or pedestrians on the road, these can be briefly illuminated beyond the normal area covered by the main beams, as if by a spotlight.
Mercedes-Benz is also presenting an innovative PRE-SAFE Demonstrator at the 21st ESVConference. For the first time this simulator uses a linear motor for this purpose, in order to accelerate the vehicle cabin to up to 16 km/h within a distance of four metres before the impact occurs. The linear drive system, which is similar to that used by the Transrapid train, is freely programmable and also works in the opposite direction. This enables various acceleration profiles and also a rear-end collision to be demonstrated. The special feature of this system is that the 'vehicle occupants' experience the effect of the PRE-SAFE® functions live, e.g. belt pretensioning, NECK-PRO and the inflatable side bolsters of the seats.
Mercedes-Benz is continuing a longstanding tradition with the ESF 2009: for the ESV Safety Conferences held in 1971 to 1975, the safety experts in Stuttgartbuilt more than 30 experimental vehicles and subjected them to crash tests to satisfy the visionary safety requirements of that time. Four of these ESFs (Experimental Safety Vehicles) were presented to the public, and many of the revolutionary ideas such as ABS or the airbag first entered series production at Mercedes-Benz. via:WorldCarFans
Mercedes announced today they have built the first Experimental Safety Vehicle since 1974 - the Mercedes ESF 2009 S400 Hybrid. The Mercedes S400 Hybrid ESF 2009 will be presented between 23 June 2009 and 16th of August in an exhibition in the company's Museum's Fascination of Technology section.
Existing features such as side impact bars could be inflated by pressures of between 10 and 20 bar, saving weight when they are deflated and allowing for other safety measures to be fitted in the saved space.
One of the most interesting systems is an auxiliary brake fitted into the floor of the car. The braking bag inflates when the car senses an imminent crash, creating friction and increasing deceleration. It also lifts the font of the car by up to 80mm, compensating for dive.
The interior, along with standard air bag and restraint systems is fitted with seat bolsters that shift the passengers about 50mm into the centre of the cabin should the car sense that a side impact is about to take place. The other safety features of interest arereflective tyres and air bags installed inside a seatbelts.
The love of motorsports starts at a young age for many racing fans, and countless enthusiasts owe their obsession to Hanna-Barbera's classic Wacky Races cartoons. The 60's-era animated series featured all manner of characters competing wheel to cartoon wheel in the most hilarious automotive concoctions ever rendered on celluloid. The complete set of the Wacky Races cars along with their respective characters will be displayed on purpose-built desert set at the Goodwood Festival of Speed that takes place on the 3rd to the 5th of July 3-5 July. Source: CarScoop via autoblog
Anybody can start sketching cars in their basement and call themselves a design studio. Of course it helps if you've got the clout and experience that comes with having steered an established coachbuilder like Pininfarina. But if you're going to make a dent in the increasingly troubled independent automotive design community, you're going to need a fancy facility to make it all happen. And that's just what Ken Okuyama has done.
The former Pininfarina chief stylist, since turned independent, has established an American arm to his expanding design enterprise, and they've set up shop at what used to be the Mercedes-Benz Advanced Design studio (which in turn moved into Chrysler's former Pacifica Advanced Design Center in Carlsbad).
The facility at 17742 Cowan Street in Irvine, California, (close to the line with Newport Beach) was purpose-built by Mercedes and boasts some 13,500 square feet of space right in the heart of Southern California's automotive design epicenter.
While Okuyama himself will presumably continue to work from his headquarters in Italy, he's assembled a crackerjack team to lead the American studio, including Neil Brooker, Michael Castiglione and Stuart Macey – the team credited with such work as the Porsche Carrera GT and Dodge Challenger, designs which clearly speak for themselves.
In addition to automotive design, the crew at Ken Okuyama Design USA will be working on furniture, eyewear and mass transit, among other things, as well as a custom coach-building operation to allow discerning (read: filthy rich) customers create their own one-of-a-kind rides. We'll expect to see more from the studio in the near future. via:autoblog
Anybody can start sketching cars in their basement and call themselves a design studio. Of course it helps if you've got the clout and experience that comes with having steered an established coachbuilder like Pininfarina. But if you're going to make a dent in the increasingly troubled independent automotive design community, you're going to need a fancy facility to make it all happen. And that's just what Ken Okuyama has done.
The former Pininfarina chief stylist, since turned independent, has established an American arm to his expanding design enterprise, and they've set up shop at what used to be the Mercedes-Benz Advanced Design studio (which in turn moved into Chrysler's former Pacifica Advanced Design Center in Carlsbad).
The facility at 17742 Cowan Street in Irvine, California, (close to the line with Newport Beach) was purpose-built by Mercedes and boasts some 13,500 square feet of space right in the heart of Southern California's automotive design epicenter.
While Okuyama himself will presumably continue to work from his headquarters in Italy, he's assembled a crackerjack team to lead the American studio, including Neil Brooker, Michael Castiglione and Stuart Macey – the team credited with such work as the Porsche Carrera GT and Dodge Challenger, designs which clearly speak for themselves.
In addition to automotive design, the crew at Ken Okuyama Design USA will be working on furniture, eyewear and mass transit, among other things, as well as a custom coach-building operation to allow discerning (read: filthy rich) customers create their own one-of-a-kind rides. We'll expect to see more from the studio in the near future. via:autoblog
Anybody can start sketching cars in their basement and call themselves a design studio. Of course it helps if you've got the clout and experience that comes with having steered an established coachbuilder like Pininfarina. But if you're going to make a dent in the increasingly troubled independent automotive design community, you're going to need a fancy facility to make it all happen. And that's just what Ken Okuyama has done.
The former Pininfarina chief stylist, since turned independent, has established an American arm to his expanding design enterprise, and they've set up shop at what used to be the Mercedes-Benz Advanced Design studio (which in turn moved into Chrysler's former Pacifica Advanced Design Center in Carlsbad).
The facility at 17742 Cowan Street in Irvine, California, (close to the line with Newport Beach) was purpose-built by Mercedes and boasts some 13,500 square feet of space right in the heart of Southern California's automotive design epicenter.
While Okuyama himself will presumably continue to work from his headquarters in Italy, he's assembled a crackerjack team to lead the American studio, including Neil Brooker, Michael Castiglione and Stuart Macey – the team credited with such work as the Porsche Carrera GT and Dodge Challenger, designs which clearly speak for themselves.
In addition to automotive design, the crew at Ken Okuyama Design USA will be working on furniture, eyewear and mass transit, among other things, as well as a custom coach-building operation to allow discerning (read: filthy rich) customers create their own one-of-a-kind rides. We'll expect to see more from the studio in the near future. via:autoblog
It's fair to say that Subaru has enjoyed a run of strong product in recent years, as well as an exponential credibility increase in enthusiast's eyes, essentially ever since the automaker began shipping over the Impreza WRX back in 2001. Those considerable achievements aside, it's likewise fair to say that Subaru has yet to well-and-truly crack the aesthetics portion of the modern carbuilding equation, having produced some daring (if ungainly) entries like the origina B9 Tribeca and a series of aggressive yet unpretty Impreza variants.
And while we applaud originality, we think the folks at Fuji Heavy Industries could use a consistent design force, a man (or woman) with a mission that's out in the public eye as something of a known quantity. Think: General Motors' Ed Welburn, former Mazda-turned-Tesla wunderkind Franz von Holzhausen, former BMW lightning rod Chris Bangle, etc.
All of this is not to say that the man behind the WRX STI rally car renderings shown here has the answers, but we know one thing: When passing these images around Autoblog's (virtual) offices, we all couldn't help but say something to the effect of: "Oooooh, damn that's hot!" – a phrase we can't remember associating with Subaru, much as we love driving the vehicles themselves. In any case, these images come courtesy of one Lars Martensson (apparently better known on the interwebs by his handle 'GRID)', a man who spends his days crafting 3D renderings for videogames (Rallisport Challenge 2 for xBox, Battlefield 2 for PC).
To us, this Swede has a handle on what the STI needs to be: Squat, mean, and purposeful. Okay, so perhaps the cut-down greenhouse wouldn't leave much room for taller folks (much less a helmet), but if one of these were parked in our driveway, well... we'd happily squat a little.
In late 2007 BMW CEO Norbert Reithofer revealed plans for several all-new models including a design study called the Progressive Activity Sedan (PAS). Then, at March's Geneva Motor Show, BMW gave us the first tangible evidence of the new PAS in the form of the 5-series Gran Turismo (GT) concept vehicle. Camouflaged prototypes have been making the rounds along the streets of Munich for several months now and today we have leaked official shots of the production that's due to go sale in Europe this November and in the U.S. early next year.
The body of the 5-series GT features a mix of elements from crossover, hatchback and wagon bodystyles, melding them together to create something that's relatively unique in the automotive world. While the styling may not be to everyone’s taste, BMW insists there's a market for a premium wagon with a coupe-like profile and plenty of innovative storage solutions. A take on the famous Hofmeister kink can be found at the rear of the window line, turning a very non-classical BMW profile into something more recognizable.
Clear differences between the production version and the concept are the smaller wheels, regular beige leather interior, rounded exhaust tips and new side mirrors.
BMW is yet to reveal what powertrain options will be available for the 5-series GT but expect to see most of the engines from the new 2010 5-series carry over. BMW is expected to launch the car initially with a new eight-speed automatic and six-cylinder engines and then expand the range to include an xDrive AWD option and V8 powertrains.
At 4.99m in length, only the flagship 7-series is longer than it. This provides plenty of room inside for passengers but oddly BMW has added seating for only four. One of the vehicle’s standout features will be its new two-tiered tailgate. The design enables owners to partially open the tailgate for small packages or stretch it all the way for bigger luggage.
